Filament R PLA Anthracite 1,75 mm 0,85kg
Fiberlogy Recycled PLA
Fiberlogy R PLA is a filament created 100% in the recycling process. It is obtained from raw material derived from carefully selected and verified sources. Thanks to this, it is a great choice for all fans of ecological 3D printing. With its parameters, the R PLA represents the highest quality, not inferior to its traditional counterparts. All filaments from the R PLA is available only in anthracite color.
Properties:
- biodegradability
- very good adhesion between the print layers
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature | 210-230°C |
Bed Temperature | 50-70°C |
Closed chamber | not required |
Fan | 75-100% |
Flowrate | 90-100% |
Printing Speed | < 100 mm/s |
Surface | glass, masking tape |
Retraction (direct) | 2-3 mm |
Retraction (bowden) | 4-6 mm |
Retraction Speed | 20-45 mm/s |
Drying conditions | 50°C / 4h |
Notes | Recommended minimum 0,5 mm nozzle |
NOTE: The accessibility of filaments depends on objective factors, such as the amount of raw material available on the market. Therefore, the manufacturer cannot guarantee the continued availability of the goods. R PLA filament may contain traces of glitter and vary in the intensity of colouring, which results from the raw material used in a given batch.