Filament Fiberlogy HD PLA Inox 1,75 mm 0,85kg
Fiberlogy HD PLA
HD PLA can be used as a replacement for ABS. It may be printed as usual PLA, and then heated up, thus gaining properties similar to ABS. This allows you to skip the printing from this material and avoiding of all inconveniences associated with printing process: shrinkage, unpleasant smell, inhaling of hazardous fumes.
Additionally, after annealing, the material is more impact and heat resistant.
- slightly glossy surface
- possibility of annealing the print in an oven and achieving properties similar to those of ABS
- after annealing – increased impact resistance and high temperature resistance
How to print?
The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
|Closed chamber||not required|
|Printing Speed||< 100 mm/s|
|Surface||glass, masking tape|
|Retraction (direct)||2-3 mm|
|Retraction (bowden)||4-6 mm|
|Retraction Speed||20-45 mm/s|
|Drying conditions||50°C / 4h|
|Notes||HD PLA White – due to the dye, the suggested minimum printing temperature is 230°C|